Households that add a fifth and sixth player to game night need three numbers before moving furniture: a width for each seat, a table height and a depth of floor behind each chair. Antonovich Group, a luxury interior designer from Dubai that plans a games room as part of a villa, brings 20+ years of practice, 500+ delivered projects, ISO 9001 certification and in-house joinery and furniture production to that kind of layout question.
Two published sets of measurements frame the answer: the table size that the international chess federation prescribes for two players, and the seat clearances in the 2010 US accessibility standards. A third source, the publisher of CATAN, states how many boxes a six-player session needs.

- A FIDE tournament table for two players measures about 110 cm by 85 cm and stands 74 cm high.
- The 2010 ADA Standards set a work or dining surface between 710 mm and 865 mm high and a knee space 760 mm wide.
- Six seats at 760 mm each need 4560 mm of table edge, which is 2280 mm of length with three seats per long side.
- CATAN played by five or six players with an expansion needs four boxes, according to the publisher.
What size is a regulated two-player table?
The FIDE Handbook sets the length of a tournament table at about 110 cm and the width at about 85 cm, each with a permitted variance of 15 per cent, and the height at 74 cm with a variance of 10 per cent. Two opponents sit on the short sides, so 85 cm is the distance between them.
The figures appear in sections 7.1.1 to 7.1.3 of the FIDE chapter on chess equipment without electronic components, effective from 1 March 2026. A surface of 110 by 85 cm is 0.935 square metres (writer's arithmetic). Measure the dining table at home against that baseline before comparing it with the six-seat reading below. The article on a gateleg table in three published lengths gives one furniture example.
How wide should each seat be at a game table?
The 2010 ADA Standards require knee clearance under a table to be at least 760 mm wide (section 306.3.5) and a clear floor space of at least 760 by 1220 mm (section 305.3). The standard is written for wheelchair users in the United States, so the figures serve here only as one published width for a seat with leg room, not as a rule for UAE homes.

The US Access Board text of the standards also sets the top of a dining or work surface between 710 mm and 865 mm above the floor (section 902.3). The FIDE height of 74 cm, or 740 mm, falls inside that span. A dining table that already sits in this range needs no change in height for a long evening of play.
How long a table do six seats need?
Six seats at 760 mm each need 4560 mm of table edge, which is the writer's arithmetic on the ADA width. Placing three seats along each long side gives a table length of 2280 mm. Keeping the FIDE width of 850 mm between facing players gives a surface of about 1.94 square metres, roughly twice the 0.935 square metres of the two-player table.

Seats at the short ends would shorten the table but narrow the board area, because the width stays at 850 mm. The extra surface matters only if the game board and the player areas need it. The article on a table for the CATAN 3D board and shared pieces lists the zones that a layout needs to hold, and a separate side table for drinks keeps cups off the main surface.
How much floor is needed around a six-seat table?
The ADA clear floor space is 1220 mm deep, so a table 850 mm wide with that depth on both long sides needs a room at least 3290 mm across, the writer's sum of 850 plus 2 times 1220. A standard dining chair needs less than a wheelchair approach, so 3290 mm is a generous upper reading.

The length of the room adds whatever route the household keeps along the ends of the table, and the sources give no figure for that route. Measure it in the room itself. Light is a second floor-plan question: where a task lamp base sits beside a game layout is covered in a separate article.
What does a six-player CATAN session add to storage?
The publisher of CATAN states that the base game plays with three or four people and that five or six players add the 5-6 Player Expansion. For a CATAN expansion played by five or six players, the page states that four game boxes are needed in total. Four boxes occupy shelf space even when the table stays clear.
The statement comes from the manufacturer's own page, Play CATAN with 5 to 6 Players, and gives a box count, not box sizes. Read the depth printed on each box and compare it with the shelf, as described in reading a game box's stated depth for shelf storage. A campaign that stays set up between evenings is covered in putting away a campaign between sessions.

Where the figures come from
Each figure in the table carries its source. Every other number in the article, such as 4560 mm, 2280 mm and 3290 mm, is the writer's arithmetic on those five figures, not a published value.
Published figures behind the six-seat reading, checked 25 October 2026 (FIDE effective 1 March 2026; ADA 2010)
- FIDE Handbook | Measure: Table length and width | Published figure: 110 cm by 85 cm, each plus or minus 15 per cent
- FIDE Handbook | Measure: Table height | Published figure: 74 cm, plus or minus 10 per cent
- 2010 ADA Standards | Measure: Surface height | Published figure: 710 mm to 865 mm
- 2010 ADA Standards | Measure: Knee width and clear floor space | Published figure: 760 mm wide; 760 by 1220 mm
- CATAN publisher | Measure: Boxes for an expansion at five or six players | Published figure: Four